Description
Introduction of the MPPT
The Maximum Power Point Tracking MPPT system is an advanced charging technology that enables solar panels to output more power by adjusting the working state of electrical modules. Due to the non-linearity of a solar array,there is a maximum energy output point maximum power point on the curve of the array. Traditional solar charge controllers switch charging technology and PWM charging technology cannot charge batteries at this point, thus unable to obtain the maximum energy of solar panels. However, the solar energy charge controller equipped with the MPPT control technology can track the maximum power point of a solar array at any time in order to gain maximum energy for battery charging.Take the 12V system for example. The peak voltage of solar panels Vpp is around 17V and battery voltage is about 12V. Generally, when the solar charge controller is charging a battery, the voltage of solar panel is maintained at about 12V, indicating that the maximum power is not used. MPPT solar charge controllers provide a solution to that problem by constantly adjusting the input voltage and current of solar panels, therefore maximizing input power.
Compared with conventional PWM solar charge controllers, MPPT solar charge controllers bring out the maximum power of solar panels and provide greater charging current. Generally speaking, MPPT solar charge controllers can improve energy utilization rate by 15 ~ 20 over PWM solar charge controllers
Advantage of controller
1.Adopt industrial-grade main controlchip, 16-level AD sampling accuracy, temperature, chargingcurrent, accurate real-timed isplay, and power generation at a glance.
2.Auto-focus MPP tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focus tracking.
3. LCD display largescreen, adjustable charging and discharging parameters. The ultra-wide charge and discharge are adjustable, as long as you understand the battery characteristics and set the corresponding charging parameters,you can charge all kinds battery(Lithium and Lifepo4 battery), please set correct charging parameter.
4.Completely 3-stage charging management. Effectively protecting the battery, make battery more durable.
5.Built-inoverheat protection. overcurrent protection. short circuit protection.
open c『, cuit protection, reverse connection protection, whenthe fault is eliminated. it will selfty recovery . without damage to the controller
6.Bidirectional MOS tube anti-backftowcircuit, high-power charging mode,
ultra-low heat generation.
7.Dual DCS.O DC load output. easy to connect
MPPT Solar Controller parameter table
MPPT Solar Controller Parameter table
Model
MPPT10
MPPT20
MPPT30
System Voltage
12V/24V Automatic adaptation
Rated Charge Current
10A
20A
30A
Rated Discharge Current
10A
Max PV Voltage Input
12V System <25V
24V System <50V
Float Charge Voltage
b1/14.4V,b2/14.2V/b314.6VAdjust Range:13V-15V
Low Votage Disconnected VolatgeLVD
10.7VAdjust Range:9.5V-11V
Discharge recovery voltage
12.6VAdjust Range:11.5V-13V
Supporting battery type
GEL and Lead Acid battery and lithium battery
Stand-by current
<10mA
USB Port
5V/2A Max
Working Temperature
一36 ~ +60℃
Size/G.W
170 x 95 x 40mm/250G
Blue PWM Controller
Model
PV-10A
PV-20A
PV-30V
Rated charging current
10A
20A
30A
Rated discharge current
10A
10A
10A
MAX PV Volt
12V system < 25V/24V system < 50V
The USB output
5V2AMAX
Stand-by Current
< 10ma
Dimensions/Weight
133 70 x 35mm/132g
Work Temperature
0~60C
PWM controller can be used in lithium battery, lifepo4 and Lead acid battery
10A 20A 30A MPPT Solar Charge Controller
PWM Solar Charge Controller picture
Reviews
There are no reviews yet.