Additional information
Type | Kitchen Lighters |
---|---|
Certification | CE / EU |
Feature | Stocked |
Model Number | 787E9 |
Plastic Type | Melamine |
Material | Plastic |
402.50 $
85 in stock
Type | Kitchen Lighters |
---|---|
Certification | CE / EU |
Feature | Stocked |
Model Number | 787E9 |
Plastic Type | Melamine |
Material | Plastic |
GN-787E quick-loading alcohol base material electric heating vaporization controller function description
The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the effect of no need to switch, fire with heart, and start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear self-reset switch to achieve more convenient gear position control. There are also models with infrared anti-air burning to choose from, easy to achieve considerable energy savings.
The controller is quick and easy to install, stable, adaptable and user-friendly, and cost-effective enough to be a replacement for the alcohol-based fuel gasifier industry. Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, heating output power: no more than 2000W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump output: AC220V, power is not more than 100W, full power range PWM voltage regulation 7, temperature probe: K-type thermocouple
8, personality function: external one-word rocker switch or three-speed self-reset switch need to buy, precision firepower adjustment function need to buy, infrared anti-air burning function need to buy Wiring instructions
1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power supply to play the role of reliable control of the total power supply and safety protection.
2, brown-blue black sheathed wire with cold-pressed flat connector: plug-in burner aluminum ring heating wire, internal switching device adopts high-power relay, and adopts unique switch control technology, life is longer than conventional Greatly extended.
3. Brown-blue black sheathed wire with cold-pressed round connector: Plug-in electromagnetic pump, its output voltage is adjustable AC voltage, due to the unique micro-computer controlled high anti-interference non-contact PWM The power adjustment technology can obtain stable output even when the igniter is ignited, and there is no malfunction. Matching with commonly used imported electromagnetic pumps allows the electromagnetic pump to perform optimally.
4. Black sheathed cable with black combination connector: plug the 220V igniter.
5. Black sheathed wire with ring lug and blue soft sheath: Use the small screw to connect the split lug of the K-type thermocouple, pay attention to ensure the correct polarity.
6. Three-core black sheathed wire with split lug: Connect one-way two-way rocker switch or three-speed self-reset switch. The switch with the branch line is on the same side, and the other line with no branch is connected to the other side of the switch.
7. There are two black sheathed wires with waterproof joints, which are connected to the infrared emitting head and the receiving head with glass window. The receiving head is a four-core cable, which is connected by the attached special extension cable. The receiving head on the back panel. Setting instructions
The following instructions are all performed when the controller's settings are in the factory state, the controller is connected to the thermocouple, and the power is turned on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state. In this state, the setting operation cannot be performed.
Press the start/stop button in the off state, the system enters the heating or standby state, and the digital tube displays the current temperature value and the gear position value respectively. The current temperature value is the temperature measured by the current thermocouple. When the gear position value is not activated, the display is 0. . In this state, you can perform the setting operation:
1. Modify the output power parameter of the electromagnetic pump: press and hold the setting button for about 5 seconds, the red digital tube displays d-1, indicating that the first power output parameter setting menu is entered, and then press the setting button, the green digital tube displays the current output of the gear. The percentage of power, at this time press the increase and decrease buttons, the power output parameters can be adjusted between 0-100.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state.
★ After adjusting the first gear parameters, if you need to adjust other gear parameters, you can press the setup button again to return to display d-1, and the data is temporarily stored. Press the increase/decrease button to enter d-2, d-3 and other gears in turn, and set the parameters according to the above method. Finally, press and hold the setting button until SAU is displayed, and all parameters are saved before one time.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be officially saved. If there is no operation for a few seconds or the system is started by pressing the start/stop button, the system will still run according to the original parameters.
★ d-1 first file default value 28.5; d-2 second file default value 32.5; d-3 third file default value 36; d-4 fourth file default value 42; d-5 five file default value 44.
2, modify the underlying parameters: display d-5 and then press the minus button, the digital tube shows the SP begins to enter the underlying parameter settings menu, and then press the minus button to display Ao1, SC, HHH, ddH, odH, oPP, SPP, SoP, FHS , SEP and other menus.
1 SP menu is the target temperature value option; default value: 190 ° C; setting range: 130-300 ° C.
★Parameter meaning: heating to this temperature stops preheating.
★ At this time, press the setting button, the digital tube will display the target temperature value, press the increase or decrease button to change the parameter, and the parameter confirmation save method is the same as before. The same applies hereinafter and will be omitted.
★ If you do not press any button for 5 seconds, the setting state will be automatically exited, and the parameter will not be memorized.
2 Ao1 menu is the ignition start temperature value option; default value: 130; setting range: 100-190 °C.
★ Parameter meaning: After reaching this temperature value, it is allowed to start work.
3 SC menu is the error correction value option; default value: 0; setting range: ±20 °C.
★ The meaning of the parameter is: When the current temperature is found to be different from the value measured by the standard thermometer, this value can be set according to the error value to correct the current temperature value to reduce the error.
4 HHH menu is the high temperature protection value option; default value: 450; setting range: 300-500 °C.
★ The meaning of the parameter is: After the temperature is reached, the system automatically protects, and the system forcibly stops the electromagnetic pump output.
5 ddH menu is the delay ignition time option; default value: 0; setting range: 0-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will be started after the corresponding time delay.
6 odH menu is the continuous ignition time option; default value: 6; setting range: 1-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
7 The oPP menu is the boot gear option; the default value is 2; the setting range is 0-5.
The meaning of the parameter is: the output power gear value of the electromagnetic pump at the time of starting.
8 SPP menu is the shutdown gear option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 1 is automatically returned to the second gear after shutdown, and then the second gear is started. 0 is to keep the original gear after the shutdown, and then the original gear is activated.
9 SoP menu is the startup mode option; default value: 1; setting range: 0-1.
The meaning of the parameter is: when the parameter is 0, the system can only be started by pressing the start/stop button or by the precision adjuster; when the parameter is 1, the system adds the function that can be started by pressing the add button, the rocker switch or the right-hand precision adjuster. .
10 FHS menu is soft and hard start option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 0 is a hard start, that is, booting directly from the start gear. 1 is a slow start, that is, it automatically rises from the 2nd gear slowly when it is turned on, until it increases to the gear position before the shutdown. Slow start is only valid when the SPP parameter option is 1.
11 SEP menu is a precision adjusted speed option; default value: 3; setting range: 1-30.
The meaning of the parameter is: the adjustment amount corresponding to the minimum angle of rotation of the external precision regulator can also be understood as the speed adjusted during rotation. The smaller the value, the finer the adjustment and the slower, and vice versa.
3, restore the factory settings: the controller is powered off, press and hold the minus button at the same time to turn on the power, display the rEc release button, long press the set button until the display SAU means that the factory settings are successful, all the parameters can be set at this time Both returned to the factory state.
Working process: Description under factory settings
Power on to the OFF state, press the Start / Stop button to enter the preheating state, the heating lamp lights up, the digital tube displays the current temperature and gear position, the output of the heating tube has an output of 220V to start heating, when the temperature reaches 130 °C, the status light Start flashing, the prompt can start the work manually, press the “Start/Stop” button or the key or fine adjustment knob to start, the status light turns to steady after the start, the ignition and the electromagnetic pump vaporization start to have the output and the corresponding indicator. Lights up, after 6 seconds, the ignition output stops, the indicator light goes out, and it enters the combustion state. At this time, the output of the heating tube still has an output, and the heating lamp is still lit until the current temperature reaches the desired target temperature to stop the heating output and extinguish the heating lamp.
After the current temperature reaches the target temperature, if the operation is not started by pressing the “Start/Stop” button, the system enters the thermal insulation working state, and the heating and heating is automatically performed. The temperature of the burner is always maintained near the target temperature, ready to start working.
Firepower adjustment method: 1 Press the “increase or decrease” button during the combustion process, and the firepower will gradually increase and decrease the gear position according to the set value of the gear position. 2 Rotate the fine adjustment knob during the combustion process, the firepower can be continuously and smoothly adjusted.
Stop method: 1 Press the “Start/Stop” button during combustion. 2 Press “fine adjustment knob” during combustion. 3 In the combustion, turn the “fine adjustment knob” counterclockwise to the minimum firepower, and then rotate. 4 In the first state of combustion, press the “minus” button. 5 In the first stage of combustion, operate the rocker switch to downshift.
Power-on method: Press the “Start/Stop” button when the 1 status light is flashing. 2 Press the “fine adjustment knob” when the status light is flashing. 3 Turn the “fine adjustment knob” clockwise when the status light is flashing. 4 Press the Add button while the status light is flashing. 5 When the status light is flashing, operate the rocker switch to increase the gear.
After using the above 12 shutdown and then booting, it is started from the system default gear.
After using the above 345 to shut down and then boot, it is started from the first gear.
Shutdown method: Press and hold the “Start/Stop” button or “fine adjustment knob” for about 3 seconds during the stop or combustion work, and the system will enter the OFF state. Precautions:
★The temperature value does not rise and fall during the heating process, indicating that the polarity of the thermocouple is reversed, and the “LLL” will be displayed later.
★ The thermocouple open circuit will display HHH and the system protection will stop. It needs to be restarted after the fault is removed.
★When the highest-grade setting value is too large, the pump oil will exceed the head's vaporization capacity, and the flame yellowing instability will occur.
★When the starting temperature setting value is too low, the flame will be unstable due to insufficient vaporization.
★ If you find that the flame is unstable when you just click it, you can set the ignition to delay 1-2 seconds to start the ignition, so you can avoid the knocking phenomenon at the moment of starting. Especially for models with air defense, it is necessary to set up this frequently because of the frequent start-up. Practice shows that this works well.
1, working voltage: AC220V 2, working voltage range: AC175-245V 3, service life: ≥100,000 times 4, ignition intensity: high-pressure powerful ignition, can ignite flammable gas and vaporized alcohol-based biofuels, 5, the igniter is sealed with epoxy resin, waterproof and moisture-proof. 6, ignition time: 12 seconds, can also be adjusted according to customer needs. Second, the commercial stove igniter - DQ2 lead wire plug connection instructions 1. Two high-voltage ignition wires 800mm are connected to the double-pin ignition needle for relative ignition, or one high-voltage ignition wire 800mm is connected to the ignition needle, and the other high-voltage ignition wire 800mm is [...]
67.50 $ Add to cartInfrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective [...]
83.75 $ Add to cartM1 electrification controller New M1 gasification controller M1E type with belt rocker switch control M2 type with flameout protection M3 controller with control fan M5 type with flameout protection and fan control First, M series electric vaporization controller description System parameter setting method: Press and hold the setting button to enter the system parameter setting, turn the knob to select the desired menu, press the setting button to display the value, turn the knob to adjust the value, and then press and hold the setting button until the SAU is displayed, indicating that the saving is successful. Note: If you [...]
98.75 $ Add to cartFully compatible with the general-purpose OCE-K339L controller, the materials are more sophisticated, the performance is more stable, and the anti-interference is stronger. Upgrade does not increase the price, if our improvement can improve your quality, I DO. 1. Plate upgrade: It adopts Aobolai KB Class A FR4 glass fiber board, which has better electrical performance and higher safety. 2, process upgrade: SMD surface patch technology, double-sided wiring design, automatic production efficiency, more stable performance; buzzer built-in, to avoid collision during transportation and use the housing to expand the sound, the sound is louder. 3, program upgrade: the main control chip [...]
115.00 $ Add to cartWater-cooled constant temperature electric vaporization controller description The controller adds water cooling thermostat function based on all the control functions and structural advantages of the GN-787E series electric vaporization controller. Combined with water-cooled electric vaporization burner, it can realize constant temperature vaporization, improve work stability and reliability, and is an upgraded product of electric vaporization. The controller is a plastic shell moisture-proof structure, with its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan. In addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output, etc. There [...]
440.00 $ Add to cart1300-Degree Portable Gas Flame Torch Flamethrower with Adjustable Hose Camping Kitchen Barbecue Flame Ignition Blowtorch Lighter for Cooking Welding Equipment Feature: Temperature can reach 1300 ° C to meet various needs, you can choose different flames according to your requirements. Turn the switch counterclockwise, pull the trigger, the flame is ejected; turn the switch clockwise, the flame will go out. 360 ° Rotary curved hose, long design, can be ignited It is ideal for thawing and thawing frozen water pipes and other pipes, which is ideal for roasting and carbonized vegetables, glaze, melted cheese, and mixed cheese and [...]
F2 type with fine adjustment anti-air burning commercial stove controller description The controller is suitable for the alcohol oil electromagnetic pump injection combustion system with blower, has infrared automatic air defense burning function, external igniter, can realize automatic high energy ignition and air defense burning, can meet the automatic control and safety energy saving needs of modern kitchen stoves. . Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 300W 5, igniter power: AC220V, no more [...]
208.75 $ Add to cartBBQ Gas Grill Replacement 3 Outlet AA Battery Push Button Ignitor Igniter Newbrand new and high qualityMaterial: Metal & PlasticColor: BlackColor: BlackFeature:1. Electric 3 Outlet Push Button Ignitor2.Suitable for BBQ Gas Grill Replacement3.Power supply: 1 x “AA” batterybattery is not includedbattery is not included4.Voltage: for DC 1.5V5.Size: 7.5 x 5 x 6.5cm Quantity:1 PCNote: Please allow 1-2cm error due make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! BBQ Gas Grill Replacement 3 Outlet AA Battery Push Button Ignitor Igniter Newbrand new [...]
Hello Welcome to our store! Quality is the first with best service. customers all are our friends. Portable automatic ignition snap-on butane metal field barbecue heating flame gun welding gas torch feature: 100 brand new and high quality Can be upside down Output power rate: 960kcal / 1.11kw / 3809BTU Burning value: 80g / h Flame temperature: up to 1300° Air consumption: 50g-140g / h Each tank of gas can be used for 1.6h-2h It only takes 2 seconds to change gasoline Weight: 174g Length: 17.5 cm Package Contents: 1x flame gun not including gas tank note: 1. Please keep [...]
Features: Made from high-quality material, durable and reliable.This butane lighter is essential to your enjoyment, whether you choose to smoke pipes, cigars or even cigarettes.Not only a watch, but also a great cigar lighter. An excellent decoration for your wrist.The cigarette lighter watch is comfortable to wear.Great gift for your friends and Condition: 100 newMaterial: MetalColor: Black / 1.76inLength for Watchband: 10.14inPackage list: 1 x Cigarette Lighter WatchNotice: Gas is not included.Please fill fuel before the actual lighting! [...]
52.49 $ Add to cart1PC Self-adhesive Numeral Door Plaque Plating Gate Digits 0 to 9 Plastic Number Tag Home Hotel Sticker Address Door Label Description: Product name: digital door number plate Product material: acrylic Product size: 5 x 3.3cm Product color: , black, gold Production process: handmade screen three-dimensional carving The back of the product: the back of the adhesive, tear that is sticky Installation method: measure the position to be pasted, and tear it open and stick it. Specifications: 1. Mirror gold shows atmosphere 2. Black bright face Joker house number 3. Bring your own adhesive and stick it firmly. 4. Surface coating, [...]
Description: Suitable for outdoor power equipment, small non petrol injection vehicles, and motorcycles. This is a universal petrol filter. Before purchasing, please ensure that your diameter and size are the same as Product name: Motorcycle Petrol Oil FilterAccessories: General purpose motorcycle, right angle 90 °, suitable for 1/4 inch or 6-7 mm hoses.Suitable for outdoor power equipment, small non petrol injection vehicles, and motorcycles.Height: about 6cm/2.4inchWidth: about 3.1cm/1.2inchPipe length: about 2cm/0.8inchOil storage height: about 4cm/1.6inchFeatures: DurableExcluding instructionsColor: TransparentMaterial: PPPacking List: Motorcycle Petrol Oil Filter x 1Note: Due to different lighting and screen settings, item colors may vary slightly [...]
Package Included: Packing Qty: 1Pcs Specification: Size: 51cm Color: As the picture shows Material: PP Features: 100 brand new and high quality. Suitable for sewers blocked by hair debris. The product itself is soft and can be changed according to the shape of the pipe. The jagged shape on the body can easily hook out the debris that blocks the sewer. High-efficiency Note: Due to hand measure, the size may have 1-3 c m error Due [...]
Smart LED Whistle Key Finder Flashing Beeping Sound Control Alarm Anti-Lost GPS Keyfinder Locator Tracker With Keyring Features: . 100 Brand New · Small in size, portable and convenient · Find your key or any other items easily · Remote control by sound · Whistle or shout within 7 meters to make it beep and flash · Comes with a chain ring and installed battery · LED torch, convenient to look for the lock eye · With ON/OFF Switch · Simply whistle to activate the alarm, enabling you to locate your keys easily · Never loose your keys again Packing [...]
5PCS Silicone Bracelet Strap Replacement Wristband Durable Environmental TPU Material Adjustable Wristband For Mi Band Description: 100 Brand New and High Quality Made of environmental TPU material, non-toxic and odorless. Made of high-quality ,environmental and healthy. Comfortable to wear. Softness is moderate, wear very comfortable. Compression molding, sturdy and durable. The size can be adjusted according to the circumstance of individual wrist. Specification Net weight:10g Color:As the picture showoptional Material :TPU+TPE Specifications: Fashion, stylish and durable Easy and simple to use Suitable for Millet Bracelet 4 Package Included: 1 x [...]
2Pcs Steering Lever Cover Carbon Fiber Scratch Resistant Long Lasting Replacement for Tesla Model 3 Y Feature: 1. Fitment: Replacement for Tesla Model 3 2016‑2023; Replacement for Tesla Model Y 2021‑2023. Please confirm whether your model is applicable before buying. 2. Real Carbon Fiber: The steering lever trim is made of real carbon fiber, and the pattern will not be deformed or distorted, which is more effective in preventing scratches and has a long service life. 3. Unique Design: This steering lever trim is designed with the original mold, which is perfectly [...]
Description: This Adapter Supports Connect Devices That Use A 3.5mm Audio Plug to Your Type C Devices Which Have No Headphone Jack. Just Plug And Play, No Install Needed. We Suggested That You Put The Headphone to The Type-C 3.5mm Adapter First, and Then Connect to Your Type-C Devices. High Quality 3.5mm Audio Headphone Jack Cable, Life Time Warranty and Customer Support - You Can Fully Enjoy Your Favorite Music And Charge Simultaneous. - Light and Easy to Carry Around. - Type-C Interface Supports A Higher Current Level to Speed Up The Charge of The Device. - You Can Use [...]
Description: Specifications: Colour: Black Packing List: Adapter x 1 Notes: See more product details1. Must-Have for Working Bringing great convenience to your life and work, Type C Male to Female Adaptor is supporting fast charging and data transfer 10GBps function, meeting your diverse usage needs. 2. Superior Material Male Female Converter is very durable, wear-resistant, sturdy and long-lasting, made of high-quality aluminum alloy material, bringing you a perfect using experience. 3. Far-Ranging Applications Type C Phone Adaptor is having a wide range of applications, [...]
USB Type C Adapter Female to Female 10GBbps Portable Charge Adapter Fast Charging Type-C Extension Cable for Phone Tablet Description: 1. Fast Charging & Data Expansion: This adapter supports fast charging and data transmission expansion, and please note that the charging and data transfer speed is decided by the device you use. Maximum support rate is 10GBps. 2. Fast Connection: To achieve video and high-speed transfer, you need to ensure that the connected cables and adapters are also in straight-through mode means port-to-port connecting but not cross connecting3. Reversible Design: The thin adapter with reversible design simplifies the connection. The [...]
Dropshipping Center Wholesale Golden Small Scissors Sewing Tools Zig Zag Scissors Sewing Supplies Vintage Scissors Cloth Cutter Note: Surface coated with anti-rust oil, the first use of dry anti-rust oil before use. Do not have to rust for a long time, but does not affect the use. 【Note】 1.Please allow 1-3cm error due to manual measurement. Pls make sure you do not mind before you bid.2.The color may have different as the difference display, pls understand.Tips: Pls take good care of yourself when you are using it. [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.