Ethernet LAN Network Cable tester Line Finder Wire Tracker POE Switch Network Cable Tester Multi-function Anti-Interference RJ45

Description

Ethernet LAN Network Cable tester Line Finder Wire Tracker POE Switch Network Cable Tester Multi-function Anti-Interference

Digital signal line finder

5 modes are supported:

1. Hunting test: digital signal hunting, supports two modes: standard hunting suitable for common places hunting; anti-interference hunting suitable for switches and long-distance hunting

2. Alignment test: fast and accurate alignment, support on-off detection, clear network cable short-circuit, open-circuit, crossover and other conditions, which is convenient for cable detection, troubleshooting, and intuitive display on the LCD display

3. Single-ended test: Insert the network cable into the network cable port on the front left, and the test result will be displayed. If there is any defect in 1-8 network cables, it will display 0

4. Length test: plug in to test the length of the network cable, support the cable length test within the range of 1m-250m, and detect the cable length with one button, which is fast and convenient

5: POE identification: Use the network cable to connect the POE device to the host, you can expressly identify whether the device is a standard POE device, and display parameters such as the number of power supply cores, voltage, and equipment standards.

With automatic shutdown function, the default time is 10 minutes, it can also be changed to 10/20/30/40/50/60 minutes, a total of 6 gears

Specification

Support cable type
4P/8P network cable，BNC cable，single-wire
Max test distance
>200m
Max scan distance
>300m
Support max voltage
48V（only ejector）
Signal frequency
455Khz
Battery type
5 x AAA battery
Ejector power consumption
Max:0.15W
Receiver power consumption
Max:0.2W
Max cable length can be measured
250m
Environment
Operating Temperature: -10 ℃-60
℃

Relative Humidity: 10-90non-condensing

Storage Temperature: -20℃-70℃

Relative Humidity: 5-90non-condensing