Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
177.50 $
50 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Commercial stove infrared anti-air burning controller function description
The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process:
The controller turns on the power switch, starts ignition, opens the oil valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, such as infrared light is blocked. It means that there is a pot to keep the burning state, otherwise the oil valve is closed and the flame is extinguished to prevent air burning. After that, the pots were monitored at any time, and there were pots and no pots. Function Description 1. High-energy ignition, sparks like open flames.
2. Prevent empty burning waste, automatically turn off the oil off the pot, put the pot to automatically send oil to ignite.
The 3,24V alcohol-based solenoid valve has an emergency switch that can be opened for continued use in case of accident. Installation Notes
1. Determine the installation position of the control box according to the length of the lead wire. It is recommended to install it on the iron frame behind the front plate of the furnace to avoid the high temperature area as much as possible.
2. The alcohol-based solenoid valve is installed horizontally, and the solenoid valve should be away from the high temperature zone.
3. Ignition pin installation method: double-needle ignition two-pin furnace internal ignition, installed near the oil outlet.
4. Installation of infrared emission and reception. Controller related connection:
1. Connect the power cable to 220V AC power supply. Set the power switch to start or stop the work. Turn off the power when not in use.
2. The ignition wire is connected to the ignition pin for ignition. The ignition pin is recommended to be in the form of a double point, which is most beneficial for the stable operation of the controller. If the single-fired burner is used, it will increase the probability of the controller being disturbed, so we do not encourage it. Be sure to reliably ground one of the high voltage wires when the customer must use it.
3. A 24V alcohol-based solenoid valve is connected to the solenoid valve line to control the total oil circuit of the stove.
4. Two-core waterproof plug is connected to the infrared emitter.
5. Four-core waterproof plug is connected to the infrared receiver.
6. In view of the harsh working environment of commercial stoves, in order to ensure long-term reliable operation of the controller, it is strongly recommended to take the waterproof and anti-fouling work of each wire joint seriously. After the debugging, the exposed wires and joints are wound with a wrap and a plastic wrap. Insulating tape and the like are tightly wound.
Installation instructions for the transmitter and receiver:
1. First, on the left side of the front beam of the furnace surface, first open the Φ20mm hole from the edge of 6-10cm. After the middle hole of the base is aligned with the opened hole, open the hole of the fixed base and fix the base of the emitter with the rivet. Insert the emitter into the hole, adjust the direction and fix the emitter with screws.
2. Drill the base of the emitter with a rivet according to the shape of the emitter;
3. Fix the receiving head on the back plate. Different hobs have different fixed positions, generally installed as follows;
a. Avoid the high temperature area of the exhaust vent and the high temperature area on the back of the stove;
b. The optical path of the transmitting head and the receiving head passes through the center point of the furnace
c. The optical path connection between the transmitting head and the receiving head cannot be blocked by the height of the furnace, and the nearest distance is 1-2 cm higher than the furnace;
d. Place the pot on the pan holder and do not block the light path connection between the emitter and the receiving head; at this time, the light path connection should be 2~4CM in front of the pot.
4. Open the Φ20mm hole at the selected position on the back plate. After the middle hole of the base is aligned with the hole opened, open the hole of the fixed base, fix the base of the receiving head with the pull stud, insert the receiving head into the hole, and adjust it. Then fix the receiving head with screws.
5. If two sets of controllers are installed on the double-head hob, the left and right sides are symmetrically installed. The two receiving heads are in the middle and the two transmitting heads are on both sides. Commissioning instructions for the controller:
1. Commission the power after installing all components. Infrared radiation debugging:
A. The upper part of the aluminum infrared component has a small eye. The function is to emit a beam of infrared light that is invisible to the naked eye to the receiving head to detect whether there is a pot on the stove. When there is a pot, the light will be blocked and the receiving head will not be received, otherwise an infrared signal will be received. This infrared ray is modulated and will not be confused with other infrared rays in the environment. The receiving head will clearly filter out this effective signal to achieve a correct judgment on the existence of the pot.
B. The aluminum infrared component has a glass window at the side end, which is a receiving head, built-in infrared receiving component and status indicator. The light is always on, indicating that the correct infrared signal is received, indicating that the infrared light is not blocked, and the transmitting and receiving directions are basically Normal, within the valid range. On the contrary, the flashing of the light indicates that the infrared signal is not received, indicating that the infrared light is blocked or emitted by the cookware, and the receiving direction is not within the effective range.
C, adjust the transmitting head to make the transmitting head emit in the direction of the receiving head. At this time, the infrared emitting head is blocked, the receiving head red light flashes, indicating that the receiving head controller is ignited, the electromagnetic valve is opened, and the receiving head is red when removed. Always bright. Precautions:
1. In the state of power or ventilation, the operator or other personnel are strictly prohibited to use the head or other body parts close to the burner, or block the light path to avoid fire burns. When it is necessary to check for fire, the fan must be turned on;
2. Under working conditions, it is strictly forbidden to place other items in the light path, so as to prevent the light path from being out of control.
3. To better experience the performance of this product, periodically wipe the transmitter and receiver with a soft object such as a sponge.
4. Cover the receiver's transmitter with something when cleaning the stove to prevent hard objects from getting scratched or water.
5. For everyone's safety, always close the main valve when not using the stove! ! !
6, commercial stove igniter – lead wire connection description: two high-voltage ignition wire 800mm with double-needle ignition needle for relative ignition, or a high-voltage ignition wire 800mm with ignition needle, and another high-voltage ignition wire 800mm The furnace body, the distance between the ignition needle and the metal of the burner is 5-6mm, and the ignition is discharged for the burner to form an ignition circuit. Ignition high-voltage line connection: The company strongly recommends that the customer use the dual-purpose ignition for the ignition needle. This kind of ignition effect is better. If the double-needle can only be used with a single needle because of the burner, one of the high-voltage output leads 800mm Connect the ceramic ignition needle, another high-voltage output lead 800mm must be fixed on the burner with screws. The distance between the ignition needle and the metal of the burner is 5-6mm. The ignition is discharged against the burner to form an ignition circuit. Note that it is not on the stove, it is not attached to the hob. If it is connected to the hob, the ignition circuit is very long. Moreover, the hob and the burner are not necessarily connected, so the ignition is cut off. In the loop, the igniter only uses half the power. Maybe you can hardly understand the truth at the same time. Maybe you will say that I have been connected in this way. It is very good. You just have to try it. So the igniter output high voltage line produced by our company is double long line. Length 800mm,
Infrared anti-air burning controller installation precautions
1. The installer must have an electrician installation qualification.
2. The rated input voltage of this igniter is 220V 50HZ. A qualified leakage circuit breaker must be installed at the front end of the power supply. The metal casing of the cooker must be protected by a grounding wire. It is strictly forbidden to connect the metal casing with a neutral wire!
3. The control switch on the panel should use a bipolar power switch of not less than 5A/250V, and the igniter power cord is connected to the power switch.
4. The controller can be fixed or suspended in the lower space of the cooker, and should avoid high temperature radiation baking.
5. High-voltage line is connected to the ignition needle. It is recommended to use dual-ignition ignition mode. The discharge spacing of the ignition needle is 3-5mm. Try not to use the single-discharge method. If only one high-voltage line is connected to the ignition needle, the other high-voltage line must be reliably connected to the burner. On the metal body, it can not be easily connected to the metal casing of the cooker, which will bring many difficult problems!
6. The length of the high-voltage line is “sufficiently long and shortest”. It is better to separate the two lines by more than 3 cm, and maintain a certain degree of drooping arc to facilitate oil drop. The high-voltage line can not be extended continuously. The wiring is not allowed to be close to the iron frame and iron plate of the stove. Do not add all kinds of casings. It is absolutely necessary to avoid twisting the two high-voltage wires together to avoid high-frequency high-voltage leakage.
7. Regularly clean up debris and do not rinse with water.
Functional Overview BF-15B + microcomputer temperature difference controller, directly set the temperature difference upper limit to achieve the effect of temperature control of the water cycle, the panel is simple and convenient to operate. To make hot and cold water cycle, mainly by improving the thermal efficiency high and low temperature difference between the value measured by the sensor and the upper and lower limit set temperature difference. Mainly used in hot water circulation system backwater control. The main function Function Name Function Description Temperature control when the temperature difference T ≤T limit, normally open relay disconnected, normally closed pull; [...]
82.00 $ Add to cartBrand BESFUL Model LC-215B + Type of intelligent temperature control regulator Measuring range -20 ~ + 140 Measurement error -10 ~ + 10 the opening size 51x71 mm Installation type window mounted output signal 6000 mA Operating voltage 220 V Dimensions 55x75x85 mm Code Senation Job Description Setting range default value 1-H temperature difference 0-80 ℃ 10 ℃ 1-P temperature difference lower limit hysteresis 1-30 ℃ 5 ℃ PH collector plate antifreeze temperature control value -1-8 ℃ 3 ℃ HS ℃ high temperature zone temperature deviation correction value -10-10 ℃ 0 ℃ LS ℃ low temperature zone deviation correction [...]
88.00 $ Add to cartHW-103 igniter: also known as industrial furnace pulse ignition controller, this product is mainly used for ignition and control of various industrial equipment and hotel stoves using liquefied gas, natural gas, artificial gas. Power-on ignition or switch-controlled ignition accidental flameout key ignition function, ion flame automatic monitoring function and flameout alarm, ignition failure and accidental flameout automatically cut off gas source safety protection, using microcomputer digital control technology, using lightning protection technology Power-on ignition/switch Control the ignition, stop the ignition after the flame is automatically detected, the solenoid valve keeps the combustion indicator light on, and when the ignition time [...]
92.50 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the [...]
96.25 $ Add to cartFunctional description of infrared anti-air burning controller for commercial stoves This controller is used on commercial gas stoves, which can realize infrared control. Controller working process: Turn on the power switch, the controller starts to ignite, and the solenoid valve is opened at the same time. After 12 seconds, the ignition stops and enters the burning state. At this time, the pot sensor composed of the infrared emitting head and the receiving head detects whether there is a pot on the stove, such as If the infrared light is blocked, it means there is a pot and keep the burning [...]
121.25 $ Add to cartDomestic LME11. 330C2 Domestic LME11. 330C2BT Original LME11. 330C2 Original LME11. 330C2BT LME11. 330C2 combustion controller is used for intermittent operation of single stage small capacity up to 350KW gas burners. LME... is used for monitoring and control of single-stage or double-stage gas burners during start-up and intermittent operation. Flame monitoring is through ionizing rod or flame detector QRA and auxiliary equipment AGQ3 or using blue flame detector QRC. According to the size and specifications of the enclosure, LME... is the same combustion controller as LGB and LMG refer to «Model Overview» Convenient remote reset, multiple colors, display error status [...]
126.25 $ Add to cart1300-Degree Portable Gas Flame Torch Flamethrower with Adjustable Hose Camping Kitchen Barbecue Flame Ignition Blowtorch Lighter for Cooking Welding can reach 1300 ° C to meet various needs, you can choose different flames according to your requirements.Turn the switch counterclockwise, pull the trigger, the flame is ejected; turn the switch clockwise, the flame will go out.360 ° Rotary curved hose, long design, can be ignitedIt is ideal for thawing and thawing frozen water pipes and other pipes, which is ideal for roasting and carbonized vegetables, glaze, melted cheese, and mixed cheese and sugar housings on pudding, protein [...]
360 Rotation BBQ Lighter USB Windproof Flameless Kitchen Plasma Ignition for Gas Stove Candle Barbecue Specification: Product size: Length 260mm Product material: aluminum + zinc alloy Product packaging: Blister packaging Charging port: type-C Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X BBQ Lighter 1 X USB Cable [...]
Features: OOTDTY brand new and high It can meet almost all your needs for barbecue and barbecue, welding, crafts and pastries. It is definitely an for IDEAL choice for picnics, hiking, camping or other outdoor activities.Easy to operate: just insert the cylinder connector into the gas bottle, press it lightly, and then turn it clockwise until it locks in place. Turn the flame adjustment knob to release the gas and press the ignition button to get a stable flame.High quality: It is made of high-quality stainless steel tube and plastic material, which can withstand high temperatures and is [...]
Newly USB Rechargeable Electric Arc Lighter Windproof Flameless Flexible for Home Kitchen BBQ Description: Features: 1. Safety design:This arc lighter is designed with 10cm longest 360 degree flexible neck, it can bend to different angles to meet your different needs. Long flexible neck keeps a safe distance from your hand, 8 seconds automatically turn off feature ensures a safety use that prevents too high temperature damage. 2.LED Battery Display:The upgraded candle lighter can display real battery volume. A fully charge can be filled within 1-2 hours with 4 LED lights all turn on. This USB lighter can offer [...]
Gas Infrared Burner Igniter: Widely used in the ignition of industrial equipment gas burners in the fields of pre-coating treatment, drying and solidification, food baking, agricultural product drying, glass manufacturing, indoor and outdoor heating, paper making, printing and dyeing, etc. Control System. Gas igniter features: gas igniter, programmatic integrated IC control; two relays, to ensure the automatic adjustment of the circuit, safety protection, weak control, conversion circuit, etc.; high-quality insulation potting plastic packaging, more enhanced Security. The output high voltage is 16KV. In normal use, the flameout can be automatically re-ignited. When the timeout is 20 seconds, the gas solenoid [...]
77.49 $ Add to cartbody, td, th { font-family: Verdana, Geneva, sans-serif; font-size: 18px; color: #636363; } body { margin-left: 0px; margin-top: 0px; margin-right: 0px; margin-bottom: 0px; } a { color: #636363; text-decoration: none; } a:hover { text-decoration: none; color: #636363; } a:active { text-decoration: none; color: #636363; } em { color: #BD1A1D; font-style: normal; font-weight: 700; } Electric Arc Lighter USB Rechargeable Flameless Windproof Flexible Candle Lighters for BBQ Stovetop SCVD889 Features: Type:Electric Arc Lighter Material:Aluminum Alloy Fire mode:Arc Description: 1.Rechargeable Battery:Arc lighters are powered by rechargeable Lithium-Ion 220mAh batteries that can be recharged [...]
Function description of alcohol-based fuel vaporization controller for precise regulation of firepower The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear [...]
415.00 $ Add to cartCondition: 100 Brand New Type:Stamp Size:11x16cm Material: Silicone Color: Clear Package Content: 1PC Clear Stamp Ideal for adding distinctive stamped embellishments to handmade cards, scrapbook pages or other paper craft projects Can be arranged and rearranged on stamp blocks in virtually limitless unique combinations Durable stamps provide crisply stamped images every time and won't yellow with age Doing a unique [...]
Description: Features: Condition: 100 Brand New and High Quality Easy to install Fits for all motorcycle Good to replace it at regular intervalsGeneral mechanical speed line interface Material: plasticSize: 5.2cm x 3cm interface:0.5-0.6MM Package Included: 10 x Fuel Gas Gasoline Filters Specifications: Condition: 100 Brand New and High Quality Easy to install Fits for all motorcycle Good to replace it at regular intervalsGeneral mechanical speed line interface Material: plasticSize: 5.2cm x 3cm interface:0.5-0.6MM Package Included: 10 x Fuel Gas [...]
Fish Tank Plants for Shrimp and Sleeping - These aquarium plants are a good gift for shrimp lovers. They provide a cozy place for your shrimp to sleep and hide. They will not affect the PH in the tank or harm your water weight: about 60gProduct size: choose according to the style detailsPacking list:1 x Fish Tank PlantSee more product and Safe for Fish: These aquarium plants will not wither or decay like real plants. They will not affect the water quality or pH of your tank. They are soft and smooth, so they will not hurt your [...]
Notes: Specifications: Product Name: 6DCT250 DPS6 Auto Transmission Release Bearing Spacer Shif Fork Car AccessorieCar make: For FOCUS KANGOO LAGUNA MEGANG ECOSPORTOE NO.: 126713B-TR Brand: TRANSPEED Quantity:1 set Features: Car Model: B-MAX L3 1.0L/ L4 1.4L 1.5L 1.6L 2012-2014 B-SEDAN L4 1.5L 14 C-MAX L4 1.5L 14 ECOSPORT L3 1.3L /L4 1.5L 2.0L 12-14 ESCORT L4 1.6L 14 FIESTA L3 1.0L /L4 1.4L 1.5L 1.6L 2.0L 10-14 FOCUS/C-MAX L4 1.6L 1.8L 2.0L 10-14 TRANSIT CONNECT L4 1.6L 14 X-TRAIL L4 1.6L 14 3 L4 1.6L 13-14 CAPTUR L4 1.2L 13-14 CLIO L3 0.9L /L4 [...]
1pc Rubber Turbo Air Pipe Sleeve for PEUGEOT 206 207 307 308 407 EXPERT PARTNER 1.6 HDI 1434C8 Seals Sealing Ring Features: 100 Brand New and High Quality Turbo Air Pipe Sleeve. Direct aftermarket replacement parts for the old or broken one. According to original factory specifications, perfect fit in. Made of durable rubber material, slightly flexible and stretchable. Fit for PEUGEOT 206 207 307 308 407 EXPERT PARTNER 1.6 HDI. Specifications: Material: Rubber Color: as picture show OEM Number: 1434.C8, 1434C8 External Diameter: 6cm/2.4in Package Weight: approx.24g Fitment: [...]
Compatible With All Type-c Usb Phones & Tablets Type C Otg High Speed Brand New Phone Accessories For Samsung Huawei Phone Description: Features: Remind: Please make sure your phone support OTG function. 100 Brand New Type-C Male to USB Female Adapter Can be Used to Connect USB Peripherals / Devices to Mobile Keyboard, Mouse, Printers and Many More USB Devices Can be Connected and Uused with Mobile Very Compact & Ultra Stylish form Factor Connector is Made Up of High Electical Conducting Materials for Long Life, Good Connectivity and High SpeedData Transfer Specification: Size:1.8 [...]
With Hobbing Circular Blades Bearing Pipe Cutter For Copper Aluminum Stainless Steel Tube Shear Cutter Manual Household Portable Description: Cutting diameter range mm: 5-50mm Cutting diameter range : 5-50mm Applicable to: metal pipe, PPR plastic pipe, copper pipe, aluminum pipe, etc Specifications: 1. Solve the problem of pipe cutting: applicable to cutting copper pipe, aluminum pipe or thin-walled non-hard metal pipe. Do not operate savagely Do not cut round pipes made of hard and thick metal. Only use round pipes made of thin wall and small hardness 2. Bearing steel blade: the blade is forged with bearing steel, with sharp [...]
Dropshipping Center Wholesale Golden Small Scissors Sewing Tools Zig Zag Scissors Sewing Supplies Vintage Scissors Cloth Cutter Note: Surface coated with anti-rust oil, the first use of dry anti-rust oil before use. Do not have to rust for a long time, but does not affect the use. 【Note】 1.Please allow 1-3cm error due to manual measurement. Pls make sure you do not mind before you bid.2.The color may have different as the difference display, pls understand.Tips: Pls take good care of yourself when you are using it. [...]
All products are in stock and delivered normally during the festival. Colored plastic handle U-shaped small scissors yarn scissors, three colors are available, the product material is 65 manganese steel + plastic handle, a single weight is about 8 grams, and the opp bag is individually packaged. It has a wide range of use, and is often used for thread trimming heads in clothing stitches, etc.; or as a [...]
Bullet Points:1、Paper Thermometer: This Thermometer strip is made of paper material, which is healthy and environmentally friendly, and will not produce harmful substances during use.2、Change Color According To Temperature: With the help of this Color Change Thermometer, you can easily know the temperature of the water in the cup without even looking at the reading on the thermometer.3、Easy To Use: The use of this Water Thermometer Sticker is usually very simple, just peel off the transparent protective film on the back and front of the sticker, and stick it on a coffee mug. 4、Wide Measurement Range: The displayed temperature range [...]
4/2/1pcs Kitchen Tools Replaceable Universal Pot Lid Handle Anti-Scalding Pot Lid Handle Pots Lid Head Kitchen Accessories Cap Bullet Points: 1、Durable and Stable: Manufactured from a combination of high-quality stainless steel and PP material, the Pot Lid Knob is heat resistant and robust for long-term use. 2、Easy to Set: The process of installation of the Pot Lid Top Replacement Knob is very easy, just put the knob, rubber gasket, and metal gasket correctly, and then use a screw to tighten them, and finish the installation in minutes. 3、Universal Design: The Pan Lid Holding Handle fits most lids with [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.