Additional information
Type | Kitchen Lighters |
---|---|
Certification | CE / EU |
Model Number | 787E2 |
Feature | Stocked |
Plastic Type | Melamine |
Material | Plastic |
358.75 $
100 in stock
Type | Kitchen Lighters |
---|---|
Certification | CE / EU |
Model Number | 787E2 |
Feature | Stocked |
Plastic Type | Melamine |
Material | Plastic |
GN-787E quick-loading alcohol base material electric heating vaporization controller function description
The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the effect of no need to switch, fire with heart, and start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear self-reset switch to achieve more convenient gear position control. There are also models with infrared anti-air burning to choose from, easy to achieve considerable energy savings.
The controller is quick and easy to install, stable, adaptable and user-friendly, and cost-effective enough to be a replacement for the alcohol-based fuel gasifier industry. Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, heating output power: no more than 2000W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump output: AC220V, power is not more than 100W, full power range PWM voltage regulation 7, temperature probe: K-type thermocouple
8, personality function: external one-word rocker switch or three-speed self-reset switch need to buy, precision firepower adjustment function need to buy, infrared anti-air burning function need to buy Wiring instructions
1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power supply to play the role of reliable control of the total power supply and safety protection.
2, brown-blue black sheathed wire with cold-pressed flat connector: plug-in burner aluminum ring heating wire, internal switching device adopts high-power relay, and adopts unique switch control technology, life is longer than conventional Greatly extended.
3. Brown-blue black sheathed wire with cold-pressed round connector: Plug-in electromagnetic pump, its output voltage is adjustable AC voltage, due to the unique micro-computer controlled high anti-interference non-contact PWM The power adjustment technology can obtain stable output even when the igniter is ignited, and there is no malfunction. Matching with commonly used imported electromagnetic pumps allows the electromagnetic pump to perform optimally.
4. Black sheathed cable with black combination connector: plug the 220V igniter.
5. Black sheathed wire with ring lug and blue soft sheath: Use the small screw to connect the split lug of the K-type thermocouple, pay attention to ensure the correct polarity.
6. Three-core black sheathed wire with split lug: Connect one-way two-way rocker switch or three-speed self-reset switch. The switch with the branch line is on the same side, and the other line with no branch is connected to the other side of the switch.
7. There are two black sheathed wires with waterproof joints, which are connected to the infrared emitting head and the receiving head with glass window. The receiving head is a four-core cable, which is connected by the attached special extension cable. The receiving head on the back panel. Setting instructions
The following instructions are all performed when the controller's settings are in the factory state, the controller is connected to the thermocouple, and the power is turned on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state. In this state, the setting operation cannot be performed.
Press the start/stop button in the off state, the system enters the heating or standby state, and the digital tube displays the current temperature value and the gear position value respectively. The current temperature value is the temperature measured by the current thermocouple. When the gear position value is not activated, the display is 0. . In this state, you can perform the setting operation:
1. Modify the output power parameter of the electromagnetic pump: press and hold the setting button for about 5 seconds, the red digital tube displays d-1, indicating that the first power output parameter setting menu is entered, and then press the setting button, the green digital tube displays the current output of the gear. The percentage of power, at this time press the increase and decrease buttons, the power output parameters can be adjusted between 0-100.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state.
★ After adjusting the first gear parameters, if you need to adjust other gear parameters, you can press the setup button again to return to display d-1, and the data is temporarily stored. Press the increase/decrease button to enter d-2, d-3 and other gears in turn, and set the parameters according to the above method. Finally, press and hold the setting button until SAU is displayed, and all parameters are saved before one time.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be officially saved. If there is no operation for a few seconds or the system is started by pressing the start/stop button, the system will still run according to the original parameters.
★ d-1 first file default value 28.5; d-2 second file default value 32.5; d-3 third file default value 36; d-4 fourth file default value 42; d-5 five file default value 44.
2, modify the underlying parameters: display d-5 and then press the minus button, the digital tube shows the SP begins to enter the underlying parameter settings menu, and then press the minus button to display Ao1, SC, HHH, ddH, odH, oPP, SPP, SoP, FHS , SEP and other menus.
1 SP menu is the target temperature value option; default value: 190 ° C; setting range: 130-300 ° C.
★Parameter meaning: heating to this temperature stops preheating.
★ At this time, press the setting button, the digital tube will display the target temperature value, press the increase or decrease button to change the parameter, and the parameter confirmation save method is the same as before. The same applies hereinafter and will be omitted.
★ If you do not press any button for 5 seconds, the setting state will be automatically exited, and the parameter will not be memorized.
2 Ao1 menu is the ignition start temperature value option; default value: 130; setting range: 100-190 °C.
★ Parameter meaning: After reaching this temperature value, it is allowed to start work.
3 SC menu is the error correction value option; default value: 0; setting range: ±20 °C.
★ The meaning of the parameter is: When the current temperature is found to be different from the value measured by the standard thermometer, this value can be set according to the error value to correct the current temperature value to reduce the error.
4 HHH menu is the high temperature protection value option; default value: 450; setting range: 300-500 °C.
★ The meaning of the parameter is: After the temperature is reached, the system automatically protects, and the system forcibly stops the electromagnetic pump output.
5 ddH menu is the delay ignition time option; default value: 0; setting range: 0-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will be started after the corresponding time delay.
6 odH menu is the continuous ignition time option; default value: 6; setting range: 1-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
7 The oPP menu is the boot gear option; the default value is 2; the setting range is 0-5.
The meaning of the parameter is: the output power gear value of the electromagnetic pump at the time of starting.
8 SPP menu is the shutdown gear option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 1 is automatically returned to the second gear after shutdown, and then the second gear is started. 0 is to keep the original gear after the shutdown, and then the original gear is activated.
9 SoP menu is the startup mode option; default value: 1; setting range: 0-1.
The meaning of the parameter is: when the parameter is 0, the system can only be started by pressing the start/stop button or by the precision adjuster; when the parameter is 1, the system adds the function that can be started by pressing the add button, the rocker switch or the right-hand precision adjuster. .
10 FHS menu is soft and hard start option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 0 is a hard start, that is, booting directly from the start gear. 1 is a slow start, that is, it automatically rises from the 2nd gear slowly when it is turned on, until it increases to the gear position before the shutdown. Slow start is only valid when the SPP parameter option is 1.
11 SEP menu is a precision adjusted speed option; default value: 3; setting range: 1-30.
The meaning of the parameter is: the adjustment amount corresponding to the minimum angle of rotation of the external precision regulator can also be understood as the speed adjusted during rotation. The smaller the value, the finer the adjustment and the slower, and vice versa.
3, restore the factory settings: the controller is powered off, press and hold the minus button at the same time to turn on the power, display the rEc release button, long press the set button until the display SAU means that the factory settings are successful, all the parameters can be set at this time Both returned to the factory state.
Working process: Description under factory settings
Power on to the OFF state, press the Start / Stop button to enter the preheating state, the heating lamp lights up, the digital tube displays the current temperature and gear position, the output of the heating tube has an output of 220V to start heating, when the temperature reaches 130 °C, the status light Start flashing, the prompt can start the work manually, press the “Start/Stop” button or the key or fine adjustment knob to start, the status light turns to steady after the start, the ignition and the electromagnetic pump vaporization start to have the output and the corresponding indicator. Lights up, after 6 seconds, the ignition output stops, the indicator light goes out, and it enters the combustion state. At this time, the output of the heating tube still has an output, and the heating lamp is still lit until the current temperature reaches the desired target temperature to stop the heating output and extinguish the heating lamp.
After the current temperature reaches the target temperature, if the operation is not started by pressing the “Start/Stop” button, the system enters the thermal insulation working state, and the heating and heating is automatically performed. The temperature of the burner is always maintained near the target temperature, ready to start working.
Firepower adjustment method: 1 Press the “increase or decrease” button during the combustion process, and the firepower will gradually increase and decrease the gear position according to the set value of the gear position. 2 Rotate the fine adjustment knob during the combustion process, the firepower can be continuously and smoothly adjusted.
Stop method: 1 Press the “Start/Stop” button during combustion. 2 Press “fine adjustment knob” during combustion. 3 In the combustion, turn the “fine adjustment knob” counterclockwise to the minimum firepower, and then rotate. 4 In the first state of combustion, press the “minus” button. 5 In the first stage of combustion, operate the rocker switch to downshift.
Power-on method: Press the “Start/Stop” button when the 1 status light is flashing. 2 Press the “fine adjustment knob” when the status light is flashing. 3 Turn the “fine adjustment knob” clockwise when the status light is flashing. 4 Press the Add button while the status light is flashing. 5 When the status light is flashing, operate the rocker switch to increase the gear.
After using the above 12 shutdown and then booting, it is started from the system default gear.
After using the above 345 to shut down and then boot, it is started from the first gear.
Shutdown method: Press and hold the “Start/Stop” button or “fine adjustment knob” for about 3 seconds during the stop or combustion work, and the system will enter the OFF state. Precautions:
★The temperature value does not rise and fall during the heating process, indicating that the polarity of the thermocouple is reversed, and the “LLL” will be displayed later.
★ The thermocouple open circuit will display HHH and the system protection will stop. It needs to be restarted after the fault is removed.
★When the highest-grade setting value is too large, the pump oil will exceed the head's vaporization capacity, and the flame yellowing instability will occur.
★When the starting temperature setting value is too low, the flame will be unstable due to insufficient vaporization.
★ If you find that the flame is unstable when you just click it, you can set the ignition to delay 1-2 seconds to start the ignition, so you can avoid the knocking phenomenon at the moment of starting. Especially for models with air defense, it is necessary to set up this frequently because of the frequent start-up. Practice shows that this works well.
Infrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective [...]
83.75 $ Add to cartY2 commercial gas stove flameout safety protection ignition controller function description This controller is used on commercial stoves, can realize automatic high-energy ignition, accidental flameout protection, and meet the automatic control and safety protection of modern kitchen stoves. 1. Basic parameters of Y2 commercial stove flameout safety protection controller 1. Product model: Y2. 2. Operating voltage range: AC175-245V 3. Service life: ≥100,000 times 4. Ignition intensity: high-energy ignition, which can easily ignite combustible gas and various alcohol-based biofuels. 5. There is a safety protection function for accidental flameout. When the flameout is accidentally closed, the solenoid valve will be turned [...]
146.25 $ Add to cartCommercial stove flameout safety protection ignition controller function description The controller is used in commercial stoves with fan control, which can realize automatic high-energy ignition, fan cleaning and accidental flameout protection functions, and meet the automatic control and safety protection of modern kitchen stoves. Controller related connection: 1. The power cable is connected to 220V AC power. 2. Two ignition high-voltage lines are connected with double-needle with line ignition needle for relative ignition, or one ignition high-voltage line is connected to the ignition needle and another ignition high-voltage line is connected to the burner. The ignition forms an ignition circuit [...]
171.25 $ Add to cartAlcohol base material without fan electrification controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to conventional heating, temperature measurement, temperature control, inside igniter ignition high-voltage output, electromagnetic pump In addition to the functions such as built-in, there is also a model with its own precision fire regulation, which can realize stepless precision adjustment and start/stop control of the oil pump flow. This function and gear position adjustment realizes no need to switch, fire with [...]
415.00 $ Add to cartDHLG12 Single-head Pulse Igniter Battery Firing Double-headed Firearm For Gas Features: Brand new and high quality Made of high quality material, durable and wear-resistant Easy to use stable performance Installation and use of A1 igniter: 1. It is necessary to drill a hole of 18mm on the stove panel for installation. Installation on the stove panel is equivalent to grounding and will not be electric. 2. Press the cover to fire continuously. If you dont press it, it will not fire. There will be sparks within 1CM of the ignition needle close to the metal body burner head Specification: [...]
Domestic LME11. 330C2 Domestic LME11. 330C2BT Original LME11. 330C2 Original LME11. 330C2BT LME11. 330C2 combustion controller is used for intermittent operation of single stage small capacity up to 350KW gas burners. LME... is used for monitoring and control of single-stage or double-stage gas burners during start-up and intermittent operation. Flame monitoring is through ionizing rod or flame detector QRA and auxiliary equipment AGQ3 or using blue flame detector QRC. According to the size and specifications of the enclosure, LME... is the same combustion controller as LGB and LMG refer to «Model Overview» Convenient remote reset, multiple colors, display error status [...]
126.25 $ Add to cartNew Wind Fully Automatic Electronic Flame Tool Butane Burners Gas Adapter Torch Lighter Hiking Camping Equipment shop 55 Description: Feature:Flame and temperature can be adjusted, the temperature can be as high as 1350 Deg.C.Wind proof, moisture proof and water resistant, better than electric welding.Fully automatic electronic ignition, safe and easy.Ergonomic design for comfortable holding in the hand.Suitable for restaurant, household, picnic, hiking, camping and other outdoor activities.It can be fixed on butane tank, which can be replaced, cycle use is value: 80g/h. A can of gas can use 1.6 hours to 2 hours continuously, replace the new tank just [...]
Features: Made of high quality metal material, sturdy and durable. Mini size and lightweight design, perfect for travel camping, hiking, candles, cooking, fireplaces, fireworks and so on. All finishes are non-toxic, safe and Eco-friendly. Easy to carry and use. All parts are rounded smooth, avoids hurting your hands. Instruction: Gasoline refilling: 1. Unfold the cotton bar. 2. Press the gasoline bottle gently and add gasoline. Flint refilling: 1. Unscrew the liner screw. 2. Take out the original flint and put the new one into the liner. 3.Tighten the screws. Specification: Material: Copper Color: Golden Size: Approx. 3.6 x 2.3cm / [...]
51.24 $ Add to cartMultifunction Stainless Steel Garlic Press Grinding Grater Crush Tool Presser Curved Garlic Grinding Slicer Chopper Press Gadget Description: Material: stainless steel PP Main use: can be peeled after the garlic crushed into mashed garlic Color: green, orange, black, stainless steel Style: modern minimalist Specifications: 1. Arc manual garlic press, arc garlic pressing structure, saving time and effort 2. The garlic hole is pressed intensively, and the garlic is pressed out by the fine hole. 3. Put the garlic on the cutting board and apply force to crush it back and forth. 4. Handle [...]
Welding Material Welding Tools Tip Electrodes & Nozzles Kit Plasma Cutting Accessories Consumable Accessories Pastry Nozzles Description: Type: welding material accessories Material: red copper Length: 28m38mn Welding current: 40A Specifications: 1. Including: extended electrode, shunt, extended nozzle, ceramic protective sleeve. 2. It is made of fine craftsmanship, high-quality red copper, high-quality ceramic, durable and durable. 3. Anti-corrosion, anti-oxidation, current stability, copper cable, advanced technology. 4. Applicable to multiple industries: intelligence, automobile, machinery, pipeline, shipbuilding, processing and manufacturing. Package Included: 1 x Nozzle 1 x Electrode 1 x Nozzle+electrode 1 x Extended nozzle 1 x Extended electrode 1 x Extended nozzle+extended [...]
Feature: 2-StrokeModel Number: Double Shoulder StrapPower Type: Petrol / x 7cmStrap, 25.5 x 16cmBoard Notes: 1. Please understand there may be mild deviation exist. 2. Due to the lighting and monitors, there are slight differences between the picture and the real item.3.Only the above package content, other products are not included. Package Contents: 1 x Grass Trimmer Double [...]
Description: Specifications: Colour: Black Packing List: Adapter x 1 Notes: See more product details1. Effective Tool for Working Type C Male to Female Adaptor is bringing great convenience to your life and work, meeting your diverse usage needs, supporting fast charging and data transfer 10GBps function. 2. Excellent Material Bringing you a perfect using experience, Male Female Converter is very durable, wear-resistant, sturdy and long-lasting, made of high-quality aluminum alloy material. 3. Broad Usage Scale Suitable for most devices, Type C Phone Adaptor is [...]
Type-C 3.5mm Jack Audio Cable Portable Type-C To 3.5mm Aux Adapter 10cm Earphone Cable Converter for Smart Phone Feature: 1. 3.5mm to Type-C Headphone Adapter: This adapter is designed to convert your Type-C port into a 3.5mm headphone jack, allowing you to use your favorite headphones with your phone or other Type-C devices. 2. Lightweight and Durable: The audio aux cable adapter is made from lightweight aluminum alloy material, ensuring that its strong, durable, and resistant to wear and tear. 3. Gold-Plated Audio Port: The gold-plated 3.5mm audio port ensures a stable and [...]
Plastic Pan Lid Holder Easy Clean Folding Pot Cover Rests Stand Durable Fork Spatula Holder Stand Save Space for Kitchen Gadgets Feature: 1. Space saving: use the pot cover storage rack more frequently to tidy the table top and make the kitchen look cleaner. The utility model solves the problem that the pot cover is in a disorderly space and the kitchen utensils are not sanitary. 2. Desktop storage: vertical pot cover frame, which can be used for many purposes and can be used as a helper. It is also durable enough to accommodate any kitchen appliance. Heavy and [...]
1/2 Sets Hamburger Press, Non-Stick Burger Press, Perfect Hamburger Mold Ideal For BBQ,Essential Kitchen & Grilling Accessories Description: Round Shape Hamburger Press Food-Grade Plastic Hamburger Meat Beef Grill Burger Press Patty Maker Mold Kitchen Tool Material: PVC Shape: Round Colour: white Mold Diameter: 13.2cm Pressing Plate Diameter: 10.6cm Specifications: Features: Hamburger patties mold maker Durable and easy to clean Made from high quality material PVC, safe and no harm to people. Put the meat in the Hamburger Press, and then it will do pretty shape for you. Package Included: 1 x Meat Press [...]
Splash Filter Plastic Activated Carbon Water Purifier Water Saving Faucet Head Extender Rotary Faucet 1080 ° Random Color 1pc Description: Material: PP Size: 10.6cmtensile length, 7cmcontraction length Diameter: 4cm, 2.5cm Color: Random Color Usage: Kitchen faucet Specifications: 1. Watering well-distributed and saving water. 2. It could be bended, folded and rotated at 360 degrees. 3. Very convenient for washing dishes, vegetables, fruits, etc. Package Included: 1PC Filter Faucet Notes: Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect [...]
Silicone Thumb Knife Protector Gears Cutting Vegetable Harvesting Knife Farm Vegetable Fruit Picker Pepper Blade Gloves Description: Cross-border package weight: 0.008kg Unit weight: 0.008kg Product volume: 26cm x 26cm x 18cm Origin: Guangdong Imported or not: No Model: small size index finger cover Article No.: MZD01 Name: thumb knife Material: silicone Processing customization: No Scope of application: agriculture and forestry Unit weight: 8g Specification: thumb straight knife large 1 Specifications: 1. It is widely used to protect fingers and is flexible. 2. Stainless steel cutter head is solid and durable. 3. It is made of high-quality manganese free stainless steel, [...]
White Silicone Finger Cap Heat Resistant Kitchen Tools Finger Protector Great Cooking Cutter Protector Anti-cut Kitchen Gadgets Description: There are 5pcs food grade silicone finger sets, protect your fingers better Perfrect tools for barbecue,can avoid your finger scald Specification: Color: As picture show Material: silicone Bigger one size:2.3 x 3.6cm Smaller one size: 1.9 x 3.6cm Specifications: There are 5pcs food grade silicone finger sets, protect your fingers better Perfrect tools for barbecue Avoid your finger scald Package Included: 5Pcs finger cap Notes: Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks! Thanks for your understandings. [...]
Description: Brand New Both right and left ear can be worn comfortably The earbud fits snugly in your ear easily which keeps your conversations private Applications: Relevant personnel: police, military, bouncer, and businessman Related sites: nightclubs, bars, paintball, security, restaurants, hotels, airports, casinos, manufacturing plants, conventions, concerts, warehouses, and noisy environments Two-pin standard diameter: Ear 3.5mm stereo top pin. Mic 2.5mm stereo bottom pin Space of two-pin: Approx.11mm Color: Black Length: Approx. 1m Applicable Models: Almost All The brand two way radio of China Compatible devices: for Kenwood KPG KPG27D, KPG29D,KPG48D, KPG49, KPG55D, KPG56D, KPG62D, [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.